The OptiMate 2 smart motorcycle charger-maintainer is the most cost effective solution for long term maintenance of a 12V batteries in any vehicle / craft that is stored in or outdoors.

•Extends battery life
•Safe long term battery care
•Sealed weatherproof enclosure
•Travel ready input: 100 - 240V

OptiMate 2 - Battery performance guaranteed!

Part Number: M79-TM422

All you need to maintain your bike battery.

Optimate3+ charger saves neglected, deep discharged batteries other smart chargers can't!

It will safely maintain your vehicle's battery during long term storage.

Recommended for all 12V lead-acid batteries from 2Ah to 45Ah, although it can also maintain larger batteries (it will just take longer to charge).
Approved by ITS to UL & CSA safety standards for battery chargers.

New model for 2011/2012 - not to be confused with the old Optimate 3.

New CAN-bus compatible version of standard Optimate 4, the ultimate all-in-one tool for 12V battery care at home, now with DUAL PROGRAM that diagnoses, recovers, charges, tests and optimally maintains, automatically. Charge the battery direct or select the program to charge via the 12V port on your CAN-bus equipped bike.

With automatic KEY-LESS activation OptiMate 4 Dual Program will charge and maintain your battery automatically until it is disconnected. OptiMate 4 Dual Program includes Low voltage PULSE recovery for even more effective recovery of badly neglected, sulphated batteries; a user friendly battery test at connection; a slick weatherproof enclosure with built-in mounting lugs and improved energy effi ciency. Extending battery life by up to 400%, OptiMate 4 Dual Program will maintain your battery safe and ready-to-go for months on end.

CAN-bus connection requires optional TM72 accessory connector.

Released April 2011.

View PDF infomation sheet

Now you can buy an Optimate for your car, boat or motorhome. The 5 amp circuit is ideal for any 12V lead/acid battery from 15Ah to 240Ah which needs to be maintained ready for instant service. Perfect for AGM, gel and high performance batteries (e.g Optima and Odyssey).

Optimate6 is the latest in Optimate technology. Featuring TecMate's latest AmpMatic microprocessor controlled circuitry, Optimate6 is genuinely revolutionary - the world's most advanced and versatile battery charger, maintainer and tester. All in a stylish, robust, weatherproof, wall-mountable enclosure.

As soon as it's connected, the ampmatic microprocessor automatically diagnoses your battery's condition and sets the optimal charge current and program.

Comes with crocodile clips (TM74) and a waterproof flylead (TM71).

*** New for 2011 ***

View larger image

Battery terminal connection lead with weatherproof cap to offer protection from water ingress when the bike is on the road. Can be left on the bike and simply connected to the Optimate or Accumate when required. Install one on each of your bikes!

New shape for 2012 with more secure round cap in bright red to make it easier to see.

NB. Will only fit Optimate III, III SP, 3+, Optimate 4 and Accumate chargers with connector dimensions of 45mm x 13mm x 8mm. Earlier Optimates have a different plug.

View larger image

Battery terminal connection lead. Can be left on the bike and simply connected to the Optimate or Accumate when required. Install one on each of your bikes!

NB. Will only fit Optimate III, III SP, 3+, Optimate 4 and Accumate chargers with connector dimensions of 45mm x 13mm x 8mm. Earlier Optimates have a different plug.

Battery terminal connection lead. Can be left on the bike and simply connected to the Optimate or when required. Install one on each of your bikes!

NB. Will only fit Optimate 1 and 2 chargers produced prior to September 2000. The old style connector measures 32mm x 22mm x 8mm.

Male plug that will allow you to connect your Optimate III/III SP, Optimate 4 or Accumate via the cigar lighter socket fitted on some bikes, or to the optional TM78 shown below.

The red collar is detachable, so you can use this plug with both the TM78 and TM68.

Use this lead to connect your Optimate 4 Dual Program Battery Charger to your CAN-bus equipped motorcycle.

View larger image

Extend the reach of the Optimate leads by 2.5 metres. Can be connected together to required length.

NB. Will only fit Optimate III, III SP, 3+, Optimate 4 and Accumate chargers. Earlier Optimates have a different plug.

View larger image

This weatherproof accessory female socket is designed to be panel-mounted on a vehicle to provide an external charging point and power outlet socket. It is the same type as is used on some Triumph, BMW and Honda motorcycles. In addition to providing a weatherproof connection point for your Accumate or Optimate charger (using the optional accessory plug lead TM72) it also provides a power outlet socket for other accessories - e.g. mobile phones, tyre pumps, portable CD players, notebook PCs, GPS navigation units, camping lights, etc. It is of particular use for scooters with sealed battery compartments and any other vehicles where use of the standard fused permanent lead is not practical.

View larger image

This weatherproof accessory female socket is designed to be panel-mounted on a vehicle to provide an external charging point and power outlet socket.
In addition to providing a weatherproof connection point for your Accumate or Optimate charger (using the optional accessory plug lead TM72) it also provides a power outlet socket for other accessories - e.g. mobile phones, tyre pumps, portable CD players, notebook PCs, GPS navigation units, camping lights, etc. It is of particular use for scooters with sealed battery compartments and any other vehicles where use of the standard fused permanent lead is not practical.
This socket is the same size as the standard cigarette lighter socket found in most cars. So, if you can plug your accessory item into your car, you can plug it into this - simples!

View larger image

Suitable for quick and easy connection to the battery on the bike or on the bench (same as supplied in box with a new Optimate).

View larger image

Mount your Optimate out of harms way with this handy wall bracket. Also acts as cable tidy when the charger is not in use. Suitable for Accumate and all models of Optimate (excluding Optimate 3+ and Optimate 4). This is the latest version.
(Please note Optimate not included!)

View larger image

CTEK XS 0.8 General Information
•Input voltage: 220-240VAC, 50-60Hz
•Output voltage: 14.4V
•Charging current: 0.8A
•Ambient Temperature: -20 deg.C - +50 deg.C
•Charger Type: Fully automatic 6-step charger for 12V batteries
•Batteries: 12V lead-acid batteries (Wet, MF, AGM, Calcium/Calcium and GEL)
•Battery size: 1.2-32Ah
•Dimensions (L x W x H): 142x51x36 cm
•Insulation : IP 65
•Weight: 0.3 kg
•Quick coupling - Yes
•Patented 6-step charging
•Connect & Forget!

The XS 0.8 is CTEK’s smallest 12V charger. It offers state of the art technology and is perfect for charging smaller 12V batteries that can be found in motorcycles, jet skis, ATVs and lawnmowers.

The unique display allows the user to follow the entire charging process. The XS 0.8 is a compact and fully automatic 6-step charger for 12V batteries from 1.2-32Ah. The XS 0.8 is IP 65 classified (splash and dust proof), delivers 0.8A and is designed to protect vehicle electronics. It is non-sparking, reverse polarity protected and short-circuit proof. The XS 0.8 is delivered with 5-year warranty.

View larger image

MotoBatt MBCBB 12V, 1.25A Big Boy Charger & Maintainer with 9 Stage Charging and Maintenance process.

9 Stage Charging and Maintenance Process:

•Qualification Phase: ensures battery is in good condition (will not begin if battery is below 2.0 volts)
•Battery Rescue Phase: used if voltage has risen unusually high due to plate sulfation
•Soft Start Phase: used if charger detects very low initial stage of charge
•Pulse Mode Phase: high frequency pulse charge, helps newly recovered battery to accept charge as it enters next phase
•Recondition Phase: works the battery at a slightly higher voltage/amperage to "re-activate" the battery plates for improved depth of charge & charge acceptance
•Bulk Charge Phase: constant current, takes battery to 80% charge capacity
•Absorption Phase: constant voltage, reduced current takes battery to 100%
•Check Phase: checks battery to make sure it holds charge properly
•Maintenance Phase: battery can be left safely on charger indefinitely, unit maintains battery at full state of readiness

View larger image

Simple trickle charger suitable for 6V and 12V batteries (switchable on underside of charger) with a low output of 300mA. Supplied with two sets of leads. One set has crocodile clips for clamping directly on to battery terminals. The other set works as a flylead connector with eyelets that can be permanently attached to the bike's battery.

View larger image